Where to find the TPMS reset button in your Hyundai

Most Hyundai models have a TPMS reset button located on the left side of the steering column, beneath the dashboard. You may need to crouch down or use a flashlight to see it clearly. The button is usually small, round, and black or gray. Some newer Hyundai models place it on the dashboard itself, near the driver's side, or inside the glove compartment — check your owner's manual for your specific year and model, as the location varies.

If you cannot find a physical button, your Hyundai may use a menu-based reset through the instrument cluster or infotainment system instead. Consult your owner's manual or contact a Hyundai dealer to confirm which method your vehicle uses.

Key Takeaways

  • The TPMS reset button is usually under the steering column on the left side, though location varies by model year and trim.
  • You must inflate all four tires to the correct pressure (listed on the driver's door jamb) before resetting the system.
  • Press and hold the reset button until the TPMS light blinks three times, then release — this typically takes 3 to 5 seconds.
  • If the light returns within a few minutes, one or more tires may still be underinflated or a sensor may be faulty.
  • Some Hyundai models require the vehicle to be running; others require it to be off — your owner's manual will specify.

Steps to reset the TPMS system

Before you reset, check the tire pressure in all four tires using a pressure gauge. The correct pressure for your vehicle is printed on a sticker inside the driver's door jamb — not on the tire sidewall, which lists the maximum pressure. Inflate or deflate each tire to match that specification exactly.

Once all tires are at the correct pressure, locate the TPMS reset button. With the vehicle off (or running, depending on your model — check your manual), press and hold the button until the tire pressure warning light on your dashboard blinks three times. Release the button. The light should turn off within a few minutes. Start the vehicle and drive for a few minutes to allow the sensors to recalibrate.

Why the TPMS light comes back on

If the tire pressure warning light returns shortly after you reset it, one or more tires is still below the correct pressure. Check all four tires again with a gauge — do not rely on how they look or feel. Even a tire that appears normal can be 5 to 10 pounds per square inch (PSI) below specification.

A persistent light can also mean a sensor is faulty or a tire has a slow leak. If all four tires are at the correct pressure and the light still does not turn off after a reset, the issue is likely a defective sensor or a puncture that is losing air slowly. In this case, have the vehicle inspected by a Hyundai dealer or a tire shop that can test the sensors.

Difference between resetting and recalibrating

Resetting clears the warning light and tells the system to start monitoring again from zero. Recalibrating happens automatically when you drive — the sensors measure the current tire pressure and establish a new baseline. Both steps are necessary: you reset the light manually, and the system recalibrates itself as you drive.

If you reset the button but do not drive afterward, the system may not recalibrate properly, and the light could return. Drive for at least 10 to 15 minutes at highway speed to give the sensors time to measure and adjust.

When to reset after tire service

Reset the TPMS system after you have a tire replaced, rotated, or repaired. The sensors need to re-establish their baseline pressure reading after any work on the tires. If you rotate your tires yourself, reset the system afterward. If a shop does the work, ask them to reset it before you leave — many shops include this as part of the service, but confirming prevents a warning light from appearing later.

After seasonal tire changes (switching between winter and summer tires), reset the system as well. The pressure in tires changes with temperature, and the new set of tires will have different pressure readings than the old set.

Menu-based reset for newer Hyundai models

Some recent Hyundai vehicles do not have a physical reset button. Instead, you reset the TPMS through the vehicle's infotainment system or instrument cluster menu. The steps vary by model, but typically involve navigating to Settings or Vehicle Information, finding the TPMS or Tire Pressure option, and selecting Reset or Calibrate.

Consult your owner's manual or the vehicle's touchscreen help menu for the exact path. If you are unsure, a Hyundai dealer can walk you through it or reset the system for you during a service visit.

What to do if you cannot find the button

If you have searched under the steering column and in the glove compartment without success, your vehicle likely uses a menu-based reset instead. Check the index of your owner's manual under "TPMS," "Tire Pressure," or "Warning Lights" to find the correct method for your model.

You can also contact a Hyundai dealer with your vehicle's year, make, and model, and they can tell you exactly where the button is or how to access the menu reset. Many dealers will reset the system for a small fee if you prefer not to do it yourself.

Frequently Asked Questions

Do I need to reset the TPMS after every time I add air to a tire?

No. You only reset the system after you have adjusted all four tires to the correct pressure and the warning light is on. If you add a small amount of air to one tire during normal maintenance, the light should turn off on its own after you drive for a few minutes.

Can I reset the TPMS while the car is running?

It depends on your model. Some Hyundais require the vehicle to be off; others require it to be running. Check your owner's manual for your specific year. If you reset it with the wrong engine state, the light may not turn off, but you can try again with the correct setting.

What if the TPMS light blinks but does not turn off?

A blinking light (rather than a steady light) usually indicates a sensor malfunction, not low tire pressure. This means one or more sensors may be faulty or the system itself has an error. Have a Hyundai dealer or tire shop test the sensors to identify which one is not working.

How long does it take for the TPMS to recalibrate after a reset?

The system begins recalibrating as soon as you drive. Most vehicles complete the process within 10 to 20 minutes of highway driving. City driving or short trips may take longer because the sensors need sustained speed to measure pressure accurately.

Will resetting the TPMS erase any other vehicle settings?

No. Resetting the TPMS only affects the tire pressure monitoring system. It will not change your radio presets, seat position, climate control settings, or any other vehicle function.