The 2015 Grand Cherokee uses a menu button sequence to clear the oil change reminder
The 2015 Jeep Grand Cherokee does not have a dedicated reset button for the oil change light. Instead, you navigate through the instrument cluster menu using the buttons on your steering wheel. The process takes about 30 seconds and requires no tools or dealer visit.
The reset works the same way whether you changed the oil yourself or had a shop do it. The light will return after the next service interval — typically 10,000 miles for synthetic oil or 5,000 miles for conventional, depending on your driving conditions and the maintenance schedule in your owner's manual.
Key Takeaways
- Turn the ignition to the "On" position without starting the engine, then use the left steering wheel buttons to navigate to the oil change menu.
- The reset sequence is: press the up arrow button until "Oil Change Due" or "Service" appears, then hold the right arrow button until the light clears.
- If you see "Oil Change Due" but no reset option appears, check that your ignition is in "On" and not "Accessory" mode.
- The light will not reset if the engine is running, so turn off the engine before you begin the sequence.
Step-by-step reset procedure
Start with the engine off and the ignition key in the "On" position — the dashboard lights will be on, but the engine should not be running. If you have a push-button start, press the button once without pressing the brake pedal.
Look at the left side of your steering wheel. You will see two buttons: an up arrow and a down arrow. Press the up arrow button repeatedly until the instrument cluster display shows "Oil Change Due," "Service Due," or "Maintenance Due" — the exact wording varies slightly by model year. This usually takes three to five presses.
Once the oil change message appears, press and hold the right arrow button (on the right side of the steering wheel) for about three seconds. The display will flash or show a confirmation message, and the light will clear. Release the button and turn off the ignition.
Start the engine to confirm the light is gone. If the oil change light is still on after you restart, repeat the sequence — sometimes it takes two attempts if the button press was not held long enough.
What to do if the reset does not work
If the light remains on after following the sequence, the most common cause is that the ignition was in "Accessory" mode rather than "On" mode. Turn the key all the way to the right (or press the start button twice without the brake) so the dashboard lights are fully bright, then try again.
A second possibility is that the engine was running during the reset attempt. The 2015 Grand Cherokee will not accept the reset command while the engine is on. Turn off the engine completely, wait a few seconds, and repeat the sequence with the ignition in "On" but the engine off.
If you have a newer Grand Cherokee with a touchscreen display instead of traditional buttons, the reset process is different — you navigate through the Settings or Vehicle menu on the screen itself. Check your owner's manual for the exact path, as it varies by model year and infotainment system.
Why the light comes back on schedule
The 2015 Grand Cherokee's oil change reminder is based on mileage and engine runtime, not on actual oil condition. Jeep's recommended service interval for most 2015 models is 10,000 miles on synthetic oil under normal driving conditions, or 5,000 miles on conventional oil. If you tow frequently or drive in severe conditions (stop-and-go traffic, extreme heat, dusty roads), the interval may be shorter — your owner's manual lists these conditions and their corresponding intervals.
The light will turn on automatically when the vehicle reaches the next service interval after you reset it. This is a maintenance reminder, not a warning that something is wrong. If the light comes on between oil changes, it usually means the reset did not take, and you should repeat the procedure.
Resetting through the Uconnect system (if equipped)
Some 2015 Grand Cherokee models came with the Uconnect infotainment system, which offers an alternative reset path through the touchscreen. If your vehicle has a center screen, you can often reach the oil change reset through Settings > Vehicle > Maintenance or a similar menu path.
The exact menu structure depends on your Uconnect version, so check your owner's manual for the precise steps. Using the touchscreen is optional — the steering wheel button method works on all 2015 models and does not require the infotainment system to function.
Common mistakes that prevent the reset
The most frequent error is attempting the reset while the engine is running. The vehicle will not accept the command, and you will either see no response or the light will not clear. Always turn off the engine first.
A second mistake is not holding the right arrow button long enough. A quick tap will not trigger the reset — you need to hold it for a full three seconds. If the display does not flash or show a confirmation, the button press was too brief.
Finally, some owners confuse the steering wheel buttons with the turn signal stalk. The up and down arrow buttons are separate controls below the turn signal lever. If you are pressing the turn signal stalk instead, the reset will not work.
When to see a dealer instead
If the oil change light remains on after multiple reset attempts using the correct procedure, the vehicle's onboard diagnostic system may have detected a problem. This is rare but can happen if the engine control module is not communicating properly with the instrument cluster.
You should also see a dealer if the light comes back on within a few hundred miles of resetting it, as this can indicate that the vehicle's mileage counter is not tracking correctly. A dealer can run a diagnostic scan to rule out electrical issues or sensor problems.
Frequently Asked Questions
Can I reset the oil change light without the engine off?
No. The 2015 Grand Cherokee will not accept the reset command while the engine is running. You must turn off the engine and set the ignition to "On" mode before starting the sequence. If you attempt the reset with the engine on, nothing will happen.
What if I have a push-button start instead of a key?
Press the start button once without pressing the brake pedal. This puts the ignition in "On" mode without starting the engine. The rest of the reset sequence is identical to the key version.
Will resetting the light erase my service records?
No. Resetting the oil change light only clears the reminder on your dashboard. It does not affect any service history stored in the vehicle's computer or your maintenance records. You should still keep receipts or notes of when you performed the oil change.
How often should I reset this light?
You should reset the light once per oil change — typically every 10,000 miles on synthetic oil or 5,000 miles on conventional oil, depending on your driving conditions. Check your owner's manual for the exact interval that applies to your vehicle.
What if the light comes on but I just changed the oil?
The reset did not take. Repeat the sequence, making sure the engine is off, the ignition is in "On" mode, and you hold the right arrow button for a full three seconds. If it still does not clear after a second attempt, have a dealer scan the vehicle for electrical issues.