The 2007 Camry uses a Fram CH10110 or Toyota 90915-YFZZ filter, depending on engine size
The 2007 Toyota Camry came with two engine options: a 2.4-liter four-cylinder or a 3.5-liter V6. Both use a spin-on filter mounted on the engine block, but they take different filter sizes. The four-cylinder engine uses a Fram CH10110 or equivalent Toyota part number 90915-YFZZ. The V6 engine uses a Fram CH8015 or Toyota part number 90915-20004. You can find your engine size on the vehicle information label inside the driver's door jamb, or by checking your owner's manual.
Aftermarket filters from Fram, Mobil 1, Bosch, and Purolator all make compatible replacements for both engines. The filter typically costs between $8 and $15 for a standard filter, or $12 to $20 for a synthetic or extended-life version. Toyota OEM filters cost slightly more but are available through any Toyota dealership or online parts retailers.
Key Takeaways
- The 2007 Camry four-cylinder uses a Fram CH10110 filter; the V6 uses a Fram CH8015.
- Check your door jamb label or owner's manual to confirm which engine your Camry has before ordering.
- Aftermarket filters from major brands fit either engine and cost less than Toyota OEM parts.
- Spin-on filters screw onto the engine block and take about five minutes to replace once the engine is warm.
Where the filter sits and how to access it
On the 2007 Camry, the oil filter is mounted vertically on the front of the engine block, below and to the right of the valve cover when you open the hood. On the four-cylinder, it sits near the passenger side of the engine. On the V6, it is positioned slightly lower and more toward the center. You do not need to remove any major components to reach it, though you may need to remove the plastic engine cover or splash guard underneath the car for easier access.
Warm the engine for two to three minutes before you start, then turn it off and wait five minutes. Warm oil drains faster and more completely. Place a drain pan underneath the filter before you loosen it, because oil will spill when you unscrew it. Use a filter wrench to grip the filter canister and turn it counterclockwise until it comes free. Hand-tighten the new filter until the rubber gasket on top makes contact with the engine block, then turn it an additional three-quarter turn by hand. Do not use a wrench to tighten it — hand-tight is correct.
Oil capacity and what to check after replacement
The 2007 Camry four-cylinder holds 3.7 quarts of oil with a filter change. The V6 holds 4.0 quarts. Always use the oil grade specified in your owner's manual: most 2007 Camrys call for 0W-20 or 5W-20 synthetic or conventional oil. Check the oil level with the dipstick after the engine has been off for at least five minutes and is parked on level ground.
After you install the new filter and add fresh oil, start the engine and let it run for 30 seconds, then turn it off. Wait two minutes and check the dipstick again. The level should be between the minimum and maximum marks. If it is low, add a small amount more and recheck. Do not overfill — excess oil can damage the engine and trigger warning lights on the dashboard.
Filter replacement intervals and maintenance records
Toyota recommends an oil and filter change every 10,000 miles or 12 months, whichever comes first, for 2007 Camrys using conventional oil. If you use synthetic oil, the interval extends to 10,000 miles or 12 months as well, though some owners report going longer between changes. Check your owner's manual for the exact interval, as it may vary slightly depending on driving conditions and the type of oil you choose.
Keep a record of each oil change — the date, mileage, oil type, and filter part number — in your glove box or a maintenance log. This record helps you track when the next change is due and provides documentation if you sell the vehicle. Many dealerships and service shops will print a receipt with this information, or you can photograph the receipt and store it digitally.
Common filter sizes and cross-reference numbers
| Engine | Fram Part Number | Toyota Part Number | Bosch Alternative |
|---|---|---|---|
| 2.4L Four-Cylinder | CH10110 | 90915-YFZZ | 3323 |
| 3.5L V6 | CH8015 | 90915-20004 | 3330 |
If you are ordering online or at a parts counter, you can use any of these numbers to find the correct filter. Most retailers cross-reference filters automatically, so entering one part number will show you compatible options from other brands. Always confirm the filter diameter and thread size match your engine before you purchase — the wrong size will not fit or will leak.
Tools and supplies you will need
You need a filter wrench (typically $8 to $15), a drain pan (any shallow container works), fresh oil in the correct grade and quantity, and a rag or paper towels. A jack and jack stands are optional if you want more room to work underneath the car, but most people can reach the filter from above with the hood open. Some filter wrenches are adjustable and fit multiple sizes; others are sized for a specific filter diameter. Measure your filter canister or check the part number to buy the right wrench size.
Dispose of the old oil and filter responsibly. Most auto parts stores accept used oil and filters for free, even if you did not buy supplies from them. Some municipalities have hazardous waste collection days. Never pour oil down a drain or into the ground — it contaminates water supplies and harms wildlife.
Frequently Asked Questions
Can I use a different brand filter if I cannot find a Fram or Toyota filter?
Yes. Mobil 1, Purolator, Bosch, and Wix all make filters that fit the 2007 Camry. The key is matching the filter diameter and thread size, not the brand. Use the cross-reference table above or ask a parts counter to confirm compatibility before you buy.
What happens if I do not change the filter at the recommended interval?
A clogged filter restricts oil flow to the engine, which can trigger a low oil pressure warning light and cause engine wear over time. Changing the filter on schedule keeps the oil clean and helps the engine last longer. Skipping changes occasionally will not cause when ready damage, but doing it regularly will.
Is synthetic oil better than conventional for the 2007 Camry?
Synthetic oil lasts longer between changes and flows better in cold weather, but conventional oil works fine if you follow the recommended change interval. Check your owner's manual for the oil grade your engine requires — that matters more than synthetic versus conventional. You can switch between them without harming the engine.
Do I need to replace the drain plug washer every time I change the oil?
Toyota recommends replacing the crush washer under the drain plug each time you drain the oil. It costs less than $1 and prevents leaks. If you reuse the old washer and it is damaged or flattened, oil may seep from the drain plug after you reinstall it.
How do I know if my filter is installed correctly?
Start the engine and look underneath for drips around the filter. If oil is leaking, turn off the engine, wait five minutes, and tighten the filter by hand another quarter turn. If it still leaks after that, remove the filter and check that the rubber gasket is seated properly on the new filter before you reinstall it.