What upgrading to Atlantik Icon means
Atlantik Icon is a newer control system platform that replaces older kit setups with updated hardware and software. An upgrade moves you from your current control system to this new platform, which typically involves swapping out physical components, installing new software, and reconfiguring your system settings to work with the new interface.
The upgrade is not automatic — you choose when to do it, and the process requires you to have the new Atlantik Icon hardware on hand before you begin. Most upgrades take a few hours to a full day depending on how complex your current setup is and whether you do it yourself or bring in a technician.
Key Takeaways
- Atlantik Icon hardware and software are separate purchases, and you need both before starting an upgrade.
- Your current system settings and configurations will not transfer automatically — you will need to input them again in the new platform.
- The upgrade process involves powering down your old system, installing new hardware, and running setup software on the Atlantik Icon unit.
- Keeping documentation of your current system settings before you start makes the reconfiguration step faster and reduces the chance of missing a detail.
What you need before you start
Gather the Atlantik Icon kit itself, which includes the main control unit and any cables or mounting hardware that came with it. You will also need the installation software, which typically comes on a USB drive or can be downloaded from the manufacturer's website if you have the product key or serial number.
Before touching anything, write down or take photos of your current system. Document which devices are connected to which ports, what settings are active, any custom configurations you have made, and the names or labels you use for different zones or functions. This record becomes your reference during setup, so the more detail the better.
You will also need basic tools — usually just a screwdriver — and a computer or tablet to run the setup software. Check the Atlantik Icon manual to see whether it requires a specific operating system or browser version, as older computers sometimes cannot run newer software.
The step-by-step upgrade process
Start by powering down your current control system completely and unplugging it from the wall. Wait a few minutes before disconnecting any cables or devices. Take a photo of the cable connections before you unplug them, even though you have already documented them — this visual reference prevents mistakes during reconnection.
Remove the old control unit from its mounting location and set it aside. Install the Atlantik Icon unit in the same location, or in a new location if your setup requires it. Reconnect the cables and devices to the Atlantik Icon ports, matching them to your documentation. Do not plug the unit into power yet.
Once all physical connections are in place, plug the Atlantik Icon into power and let it boot up. Open the setup software on your computer or tablet and follow the on-screen prompts. The software will walk you through naming zones, setting device parameters, and configuring any automations or schedules you used before. This is where your notes from the old system become essential — you will be entering the same information again, but into the new interface.
Reconfiguring your settings in the new system
The Atlantik Icon interface works differently from older systems, so even if you are familiar with your old setup, expect the menus and options to be in different places. The setup software usually has a help section or tooltips that explain what each setting does. Take your time here — rushing through configuration often means discovering later that something was set wrong.
If your old system had custom rules or automations — for example, "turn on device B when device A reaches a certain level" — you will need to recreate those in Atlantik Icon. The logic may be similar, but the steps to set it up are usually different. Refer to the Atlantik Icon manual or online documentation if you are unsure how to recreate a specific rule.
Test each device and connection as you configure it rather than waiting until everything is done. This catches problems early, when they are easier to fix, instead of discovering at the end that something was misconfigured.
Troubleshooting common upgrade issues
If the Atlantik Icon does not power on after you plug it in, check that the power cable is fully seated in both the unit and the wall outlet. Some units have a power button on the back or side — make sure it is switched on. If the unit still does not respond after a few minutes, try a different power outlet to rule out a circuit breaker issue.
If devices are not connecting to the Atlantik Icon, verify that the cables are plugged into the correct ports. Consult your documentation and the manual to confirm which port type each device needs. If a cable looks damaged, try a replacement cable before assuming the device itself is faulty.
If the setup software will not launch on your computer, check that your operating system and browser meet the software's requirements. Try restarting your computer and downloading the software again. If you are using an older computer, it may not be compatible — try a different device if one is available.
When to call a technician instead
If you are uncomfortable working with hardware connections or if your current system is complex with many devices and custom configurations, a technician can handle the upgrade for you. Technicians have the tools and experience to move your setup quickly and can often complete the reconfiguration in a single visit.
You should also consider professional help if your old system has devices that are no longer manufactured or if you are unsure whether those devices are compatible with Atlantik Icon. A technician can test compatibility before you buy the new kit, saving you money and frustration.
After the upgrade is complete
Once your Atlantik Icon system is running and all devices are responding, spend time learning the new interface. Atlantik Icon may have features or automations that your old system did not have — exploring these can help you get more out of your new setup.
Keep the Atlantik Icon manual and any setup documentation in an straightforward-to-find place. If you need to add new devices later or troubleshoot a problem, having these documents on hand saves time. Also keep the product key or serial number somewhere safe — you may need it if you ever reinstall the software or contact support.
Frequently Asked Questions
Can I keep my old control system running while I set up Atlantik Icon?
Yes, you can run both systems at the same time during the transition. This is actually helpful because you can test the new system while the old one keeps your devices running. Just make sure both systems are not trying to control the same devices simultaneously, as this can cause conflicts or unpredictable behavior.
What happens to my old control system after I upgrade?
Your old system becomes inactive once you disconnect it. You can keep it as a backup, sell it, or recycle it according to your local regulations. Some manufacturers accept old units for refurbishment or recycling if you contact them directly.
Do I need internet for Atlantik Icon to work?
That depends on your specific setup and which features you want to use. Basic local control usually works without internet, but remote access and cloud features require an active connection. Check the Atlantik Icon manual to see which functions need internet and which work offline.
Will my devices work with Atlantik Icon if they worked with my old system?
Not always. Atlantik Icon may use different connection standards or protocols than your old system. Before you buy the kit, check the manual or contact the manufacturer to confirm that your specific devices are compatible with Atlantik Icon.
How long does the upgrade usually take?
A straightforward upgrade with a few devices typically takes two to four hours if you do it yourself. Complex systems with many devices or custom configurations can take longer. A technician can often complete the same work in one to two hours because they are familiar with the process.