Deezee Tailgate information is a motorized system that lowers and raises your truck bed tailgate at the push of a button
Deezee Tailgate information is an aftermarket device that attaches to your truck's tailgate and uses electric motors to lower it partway or all the way down, then raise it back up. Instead of manually lifting a heavy tailgate — which can weigh 50 to 100 pounds depending on your truck — you press a button on a remote control or use a switch inside the cab. The system does the physical work for you.
This is not a factory feature on most trucks, though some newer high-end models offer similar systems built in. Deezee makes the aftermarket version that truck owners can have installed on existing vehicles. The device is particularly useful if you load and unload your truck bed frequently, have a bad back or shoulder, or straightforward want the convenience of powered operation.
Key Takeaways
- Deezee Tailgate information uses electric motors to lower and raise your tailgate with a button press instead of manual lifting.
- The system comes with a remote control and typically also includes a cab-mounted switch for hands-free operation.
- Installation requires drilling into your tailgate and running wiring to your truck's battery, which usually takes a few hours at a shop.
- The device works on most full-size trucks and some mid-size models, but you should check compatibility with your specific year and make before purchasing.
- Battery drain is minimal during normal use, though the system draws power whenever the truck is running or the remote is activated.
How the motorized mechanism actually works
The Deezee system uses two electric motors mounted on either side of your tailgate. When you press the button on the remote or the cab switch, the motors engage and pull cables or drive a mechanical linkage that lowers the tailgate smoothly. The motors have built-in safety features that stop the tailgate if it hits an obstacle, so it will not crush your fingers or damage cargo.
The remote control is wireless and typically has a range of 30 to 50 feet, depending on the model year and conditions. The cab switch is hardwired directly to the system and works whenever your truck is on. Both controls operate the same motors — you can use whichever is more convenient at the moment.
The system is powered by your truck's battery and draws current only when the motors are actively running. Once the tailgate is fully lowered or raised, the motors stop and draw no power. This means the battery drain is similar to running your power windows or power locks.
What you need to know before installation
Installation is not a straightforward bolt-on job. A professional shop will need to remove your tailgate, drill mounting holes for the motor brackets, run electrical wiring from the battery through the truck frame to the tailgate, and test the system before reinstalling everything. The process usually takes 2 to 4 hours depending on your truck's design and the shop's familiarity with the product.
You will need to know your truck's year, make, and model before ordering, because Deezee makes different kits for different vehicles. A 2015 Ford F-150 kit is not the same as a 2020 Chevrolet Silverado kit. Check the product listing or contact the seller to confirm your truck is compatible.
The cost of the system itself typically ranges from $300 to $600, and installation labor usually adds another $200 to $400 on top of that. Some truck shops are familiar with this product and can install it quickly; others may charge more if they have to figure out the process as they go.
Maintenance and potential issues
The Deezee system has few moving parts and requires minimal maintenance. The main thing to watch for is water intrusion into the motor housings, especially if you wash your truck bed frequently or park it in heavy rain. Most kits are sealed reasonably well, but over time seals can degrade.
If the tailgate moves slowly or stops partway, the most common cause is a low battery or a loose electrical connection. Check that your truck's battery is in good condition and that the wiring connections at the battery and motor are tight and free of corrosion. If the remote stops working, the batteries in the remote itself may be dead — these are straightforward replaceable batteries, not a system failure.
If one motor fails, you may be able to replace just that motor rather than the entire kit, though this depends on the model and how old the system is. Deezee parts are available through truck accessory shops and online retailers.
Comparing Deezee to other tailgate information options
Deezee is one of the most common aftermarket brands, but other manufacturers make similar systems. Bedlocker and Lund also offer motorized tailgate systems with comparable features and price ranges. The main differences are in remote range, motor speed, and how well they fit specific truck models.
If your truck is a recent model year, you might also check whether the manufacturer offers a factory tailgate information option as an add-on. Ford, Chevrolet, and Ram all offer this feature on some 2020+ models, and factory systems often integrate more smoothly with the truck's electrical system and warranty. However, factory options are usually only available when you order a new truck, not as a retrofit.
For older trucks or models where factory options do not exist, Deezee and similar aftermarket systems are your main choice. The decision usually comes down to which brand has the best fit for your specific truck and which shop near you has the most experience installing it.
Power consumption and battery impact
The Deezee system draws power only when the motors are running, which is typically 30 seconds to 2 minutes per use depending on how far you lower the tailgate. A full lower-and-raise cycle uses roughly the same amount of battery power as running your headlights for a few minutes.
If you use the tailgate information several times a day, the cumulative drain is noticeable but not severe on a healthy truck battery. If your truck's battery is already weak or old, adding this system might make it more likely to fail on a cold morning. A newer battery in good condition will handle the load without issue.
The system does not draw power when idle, so leaving it installed will not slowly drain your battery if the truck sits unused for a week. The only exception is if the remote control is left in the truck and accidentally activated repeatedly, which would drain the remote's own batteries, not the truck's.
Frequently Asked Questions
Can I install Deezee Tailgate information myself?
Most people should not attempt this without electrical and mechanical experience. The installation requires running wiring through your truck frame, drilling into the tailgate, and connecting to the battery safely. A mistake can damage your truck's electrical system or create a fire hazard. A professional shop is the safer choice.
Does Deezee Tailgate information work in cold weather?
Yes, but the motors may move more slowly in very cold temperatures because the grease inside the motors thickens. The system will still function, just not as quickly. Once the truck warms up, speed returns to normal. Extreme cold (below -20°F) can temporarily reduce performance, but this is rare in most climates.
What happens if the power goes out while the tailgate is lowering?
The tailgate will stop wherever it is at that moment. You can manually push it the rest of the way down or back up, though it will be heavier than normal since the motors are not assisting. Once power is restored, the system works normally again.
Will Deezee Tailgate information void my truck's warranty?
It depends on your truck's warranty terms and how the installation is done. Some manufacturers void the warranty on any aftermarket electrical modifications, while others only void warranty on the specific component affected. Check your warranty paperwork or call your dealer before installation to understand the impact.
Can I use Deezee Tailgate information if my tailgate is damaged or dented?
Minor dents usually do not matter, but significant damage that affects the tailgate's alignment can prevent the system from working smoothly. The motors rely on the tailgate moving in a straight line. If your tailgate is bent or misaligned, have it straightened before installing the information system.